Welcome to your XPONENTIAL Exhibitor Console!

The Exhibitor Console is your XPONENTIAL hub for all the information you need to know – from deadlines to promotional items - in one convenient location.

Important Dates and Information
Virtual Platform Launch Platform Link Note: only registered attendees can access the virtual platform and virtual booth.	September 28, 2020
Virtual Platform Coffee Talk Zoom Link Meeting ID: 865 9877 2303 Passcode: 447699 Phone: +1 301 715 8592	October 1, 2020 1:00pm EST
XPONENTIAL 2021 Rebook Rebook will take place during XPONENTIAL 2020. You will receive an email by Thursday, October 5 with your rebook time. This will be the time that you can log into the system and select your physical booth location for XPONENTIAL 2021 scheduled for Atlanta May 3-6.	October 7-8, 2020

Important Dates and Information

Virtual Platform Launch

Platform Link

Note: only registered attendees can access the virtual platform and virtual booth.

September 28, 2020

Virtual Platform Coffee Talk

Zoom Link
Meeting ID: 865 9877 2303
Passcode: 447699
Phone: +1 301 715 8592

October 1, 2020

1:00pm EST

XPONENTIAL 2021 Rebook

Rebook will take place during XPONENTIAL 2020. You will receive an email by Thursday, October 5 with your rebook time. This will be the time that you can log into the system and select your physical booth location for XPONENTIAL 2021 scheduled for Atlanta May 3-6.

October 7-8, 2020

Use our Promotional Toolkit to share your participation at XPONENTIAL and give your customers a discounted registration with code EXHOFFXPO20!

Hydrogen Craft Corporation

Huzhou, Zhejiang
China
http://www.qinghangFC.com

Booth: Virtual Booth

Let's power your applications with hydrogen fuel cells...

We are dedicated in developing hydrogen PEM fuel cells and applications. We build light weighted fuel cells and power management system to propel aircrafts and other UAS. We also build hydrogen fuel cell power generators which only produce water. Hydrogen is an ideal power for unmanned systems, due to its superior power density, 570wh/kg on our multi-rotor and 850wh/kg on fix wing. Fuel cell multi-rotor drone, HydroCoptor-4, can fly 4.5 hrs. The secret behind it, is the 3X higher power density than lithium battery. We work with partners worldwide to build PEM solutions for their applications. Fuel cell can be used on high altitude to replace jet engine. It is also an ideal power source to boost the endurance of UAM vehicles.

Show Specials

Free preliminary consultation of hydrogen fuel cell power conversion. (20201005)

Got an application that need lighter weight or longer endurance?

Please discuss with us your need. We provide preliminary consultation for free.

We will sign and NDA first than start collecting information. We will deliver a proposal include the hydrogen fuel cells you need, weight estimate, and size of tanks.

Let's work together!

ACFC-48-2700 Fuel Cell Stack (20201005)

For potential client's convenience to test hydrogen fuel cells on their application, we offer an AUVSI special price for this 1700w air cool fuel cell stack. It comes with fan and controllers. BMS not included since it is application specific.

Rated Voltage: 48V

DC output: 32V-80V

Rated Power: 2700w

Hydrogen Consumption Rate at Full Power: 27L/min

Rugular Price: USD13,500 ExWork

AUVSI Special Price: USD11,900 ExWork

Note:

1. This price is good beween 10/6/2020 and 11/8/2020.

2. Please provide proof of AUVSI attendee.

3. Limit 5 sets per customer. For large volum orders or custom orders please contact haililiu@gmail.com or call +86 18600073973

4. Delivery date is subject to availability.

ACFC-48-1700 Fuel Cell Stack (20201005)

For potential client's convenience to test hydrogen fuel cells on their application, we offer an AUVSI special price for this 1700w air cool fuel cell stack. It comes with fan and controllers. BMS not included since it is application specific.

Rated Voltage: 48V

DC output: 32V-80V

Rated Power: 1700w

Hydrogen Consumption Rate at Full Power: 16L/min

Rugular Price: USD8,500 ExWork

AUVSI Special Price: USD7,500 ExWork

Note:

1. This price is good beween 10/6/2020 and 11/8/2020.

2. Please provide proof of AUVSI attendee.

3. Limit 5 sets per customer. For large volum orders or custom orders please contact haililiu@gmail.com or call +86 18600073973

4. Delivery date is subject to availability.

Press Releases

Hydrogen Craft Introduces PEM Fuel Cells to Global UAV and UAS Makers (20201005)

Hydrogen Craft Corporation, the Deqing, China based company founded by a prior Dominion Resource Inc. employee live in Virginia, Haili Liu, is making their first presence on international stage to introduce Hercules series hydrogen PEM fuel cells to global UAV and UAS makers.

The company is demonstrating their latest ACFC-48-1700 light weighted fuel cell stacks and the fuel cell drone it applied on, HydroCopter-4. HydroCopter-4 can fly up to 4.5 hours in the air, significantly longer than the lithium batteries can do. The 800wh/kg fuel cell system power density is the key factor of it. In comparison, most lithium batteries on multi-rotor drones can only work at 180wh/kg.

The breakthrough in power density will dramatically increase the endurance of UAV and other UAS applications. It is also possible to power UAM vehicles in the future. Most lithium powered UAM protos fly less than half an hour. The company is developing a 140kg MTOW scaled proto, to demonstrate that their fuel cell system which can support such a multi-rotor UAM for 1.5 hours. The proto will be tested at the end of October 2020. Video will be released on AUVSI XPO and Youtube.com.

Varied from other fuel cells makers, Hydrogen Craft do not seek to provide a “Battery Pack” type of solution, where fuel cells, hydrogen tanks and BMS are integrated into on hull as a complete product. Hydrogen Craft believes that fuel cell systems design should be integrated into the aircraft design to save weight, optimize environment control, and gain more power density advantage. It also has a proprietary DFC (Distributed Fuel Cells) technology which allows small fuel cells to be installed in every corner of an aircraft to serve as a large power source. The 140kg UAM proto will be powered by this DFC and DEP (Distributed Electrical Propulsion) technology.

Although this is the first global presence of this start up, they have worked 3 years since 2017 to earn their reputation as a spearhead company in China in the hydrogen aviation industry. They have accepted 3 rounds of angel fund financing of 6 million USD in total.

According to company's strategic plan, it will work with global partners to promote its fuel cell power solutions for UAS, provide fuel cell stacks, power management systems and integration services to global clients.

Products

HydroCoptor-04 Multi-rotor Drone

This is a fuel cell powered long endurance multi-rotor drone that can fly max 4.5 hrs, or carrying max 9kg payload. It is an ideal platform for many applications, such as search and rescue, emergency lighting, forest management, and fire protection.... More Info Less Info

Hydrocopter-04 adopts Distributed Fuel Cells (DFC) technology, which allows two 1.7kw fuel cell to provide 3.4kw total rated power. Smaller fuel cells have higher system reliability and efficiency.

With an improved power density close to 700w/kg, this 29kg MTOW drone can carry 9kg maximum payload, or 31% maximum payload ratio. It also adds more flexibility between payload and endurance by choosing various sizes of hydrogen tanks. With 36L 35MPa tanks configuration, it achieved a maximum endurance of 4.5 hours.

Specs of HydroCpotor - 04

1. Axle to Axle: 1600mm

2. Power: 1,700W *2

3. MTOW: 29kg

4. Max Payload: 9 kg

5. Ascending Rate: 3m/s

6. Cruising Speed: 10m/s

7. Control Radius: 30KM

8. Ceiling: 3000m

9. Max Endurance: 4.5 hrs (see graph below)

10. Safety Features: on board power monitoring, obstacle avoidance, propeller broken protection

11. Intelligent Flying: 1024 points route planning, target lock-in mode, preset returning points, point of interest, in route via points editing.

12. Rain Proof: Moderate rain

13. Wind Resistance：12m/s

14. Dust Proof： IP5

15. Work Temperature: -10 °C～45°C

16. Noise : ＜65dBA@3m

Alpine Swift - Hydrogen Powered Fix Wing

Apline Swift is a low altitude long endurance fix wing UAV. Its 20 hours' maximum endurance and 10 kg maximum payload capacity make it a perfect platform for various applications. It has been used in gas pipeline inspection, fire control, and mapping.... More Info Less Info

Specifications:

Wingspan：4.98m
Length：3.65m
Height: 1.00m
Power：Hercules ACFC-1700 Air Cool Hydrogen Fuel Cell
MTOW: 35kg
Max Endurance：18 hours
Cruise Speed: 57.6 km/h
Flying Range：1000 km
Ceiling：3000 m
Max Payload: 10 kg
Auto-pilot：Auto take-off & landing. Auto return; Flying route planning with 1024 GPS points preset; One-click on map circulating; Auto-Manual dual mode switch during flight
Windproof: 10m/s
Work Temperature: -10 °C～45°C
IP23
Work Humidity：5%-90%
Take-off distance: 300 m
Landing distance: 300 m

ACFC-48-1700 Hydrogen PEM Fuel Cell for UAV

This fuel cell stack is featured with 680w/kg power density. It can be used on light weighted applicaitons. Multiple stacks can be connected and scaled up under our proprietary BMS technology to support high power consumption applications.... More Info Less Info

ACFC-48-1700 Parameters
Rated Parameters
Output Parameters	Rated Power	1700W
	Rated Voltage	48V
	Rated Current	35A
	DC Voltage Range	32-80V
	Efficiency	≥50%
Fuel Parameters	H2 Purity	≥99.99%（CO＜1PPM)
	H2 Pressure	0.045～0.06Mpa
	H2 Consumption	16l/min
Ambient Parameters	Operating Ambient Temp.	-5～45℃
	Operating Ambient Humidity	0%～100%
	Storage Ambient Temp.	-10～75℃
	Noise	≤55 dB@1m
Physical Parameters	FC Stack Dimensions（cm)	28(L)14.9(W)6.8(H)
	FC Stack Weight (kg)	2.5
	System Dimensions（cm）	28(L)14.9(W)16(H)
	System Weight（kg）	3（including fans and BMS）
	Power Density by Volume	595W/L
	Power Density by Weight	680W/KG

ACFC-48-2700 Hydrogen PEM Fuel Cell for UAV

This fuel cell stack is featured with 690w/kg power density. It can be used on light weighted applicaitons. Multiple stacks can be connected and scaled up under our proprietary BMS technology to support high power consumption applications.... More Info Less Info

H-48-2700 Parameters
Rated Parameters
Output Parameters	Rated Power	2700W
	Rated Voltage	48V
	Rated Current	56A
	DC Voltage Range	44-74V
	Efficiency	≥50%
Fuel Parameters	H2 Purity	≥99.99%（CO＜1PPM)
	H2 Pressure	0.045～0.06Mpa
	H2 Consumption	27L/min
Ambient Parameters	Operating Ambient Temp.	-5~45℃
	Operating Ambient Humidity	0%～100%
	Storage Ambient Temp.	-10~75℃
	Noise	≤55 dB@1m
Physical Parameters	FC Stack Dimensions（cm)	28.2(L)23.5(W)6.9(H)
	FC Stack Weight (kg)	3.91
	System Dimensions（cm）	28.2(L)23.5(W)16(H)
	System Weight （kg）	5.5 (including fans and BMS)
	Power Density by Volume	590W/L
	Power Density by Weight	690W/KG

Sevices We Provide

We mainly provide two types of services, engineering service for implementation of fuel cell power on your UAS and drone services.... More Info Less Info

Services

Got an idea to test your application with hydrogen fuel cells? We provide following services to global wide customers and partners.

Engineering Service

1. Free preliminary hydrogen power consultations service.

This is a free service that mainly consists of an information gathering session from potential client. After signing an NDA we will listen to your need and give you a preliminary study based on the information we collected. We will give you recommendation on the parameters of fuel cell systems and the expected come out of it.

2. Engineering design with hydrogen fuel cells on your application.

If you are satisfied with our recommendation, we can provide 3D models of the system we recommended or even help you with the structural design/alteration and power management system design.

Hydrogen fuel cell system normally take a larger space than lithium. It is always the more efficient to consider it with the entire structure of your application. We have to consider environment, safety , weight and many other factors. We will share our integration experiences with our client and work as a team.

3. Hands on training and implementation sessions at client’s site.

When it comes to implementation stage, we will send our engineers and experts to your site to get the work done. We also provide hydrogen related training services in this stage. There are always some small odds come up. No worries, we are on your side.

4. Custom design of fuel cell systems.

If you have an application beyond the regular power rate and environment we have in the stock. We are willing to design and build it to your need. Please let us know how we can help.

Drone Services

Besides the engineering services above we also provide drone services to our global customers through our partners.

*Please note, Hydrogen Craft Corporation do not provide any military product and services to any country and client. We only work to improve people’s life.

Social responsibility weighs a lot in our business. If you are an organization in need of any drone services or emergency power source in a natural disaster. We may be able to offer some help. Please write to help@qinghangfc.com or call +86 18600073973.

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".

Name*

Email*

Comments*

Type the letters exactly as they appear*