The VN-310E combines tactical-grade inertial sensors, two multi-band L1/L2/ E1/E5b GNSS receivers, and advanced Kalman filtering algorithms to provide optimal estimates of position, velocity, and attitude in a miniature footprint. It is designed to meet the demands of most military and aerospace applications, bringing unprecedented capability to SWaP-C constrained applications. KEY FEATURES: •GNSS Compass for static and low dynamic heading accuracy •VectorNav Processing Engine (VPE) for disturbance rejection, adaptive filtering, dynamic filter tuning •Hard/soft iron compensation •Coupled position, velocity and attitude estimates •All sensors individually calibrated for bias, scale factor, misalignment, and temperature over full operating range (-40°C to 85 °C) •184 channel L1/L2/E5b GNSS receivers: RTK capable, support for external RTCM v3 inputs •Raw GNSS data: exportable RINEX data for PPK and raw psuedorange, Doppler and carrier phase outputs •800 Hz IMU data •400 Hz navigation and attitude data •Yaw/Pitch/Roll •Position and Velocity •Coning and sculling integrals (ΔV’s, Δθ’s) •Data output format: ASCII (VectorNav), NMEA-0183, Binary (VectorNav) •Tactical Rugged IP 68 rated enclosure designed to DO-160G •Vibration: MIL-STD-810G, EMI: MIL-STD-461G, Electrical: MIL-STD-1275E •ITAR-Free

The xNAV650 from OxTS, combines cutting edge MEMS IMU sensors with survey-grade GNSS receivers for a tactical grade INS. Weighing just 130g, the xNAV650 is ideal when precision is crucial and the payload needs to be light. Quad constellation means users of the xNAV650 INS can benefit from 2cm position accuracy even in the most challenging GNSS environments.The xNAV650 INS benefits from an optional Precision Time Protocol time stamping. All xNAV650 devices have the option to use PTP when synchronizing time with LiDAR and other sensors. OxTS’ gx/ix tight-coupling technology ensures users receive the most accurate measurements, even in tough GNSS conditions. By combining OxTS INS data with raw LiDAR data using OxTS' Georeferencer, users can increase the quality of their pointclouds, decrease survey time, intelligently analyze data, and improve project ROI. OxTS NAVsuite software is FREE, allowing you to easily configure and post-process data. ITAR free.

The OEM719 can be scaled to offer sub-meter- to centimeter-level positioning and is field upgradable to all the OEM7 family firmware options, including NovAtel CORRECT with RTK for centimetre level real-time positioning, GLIDE for decimeter level pass-to-pass accuracy and SPAN for continuous 3D position, velocity and attitude. FEATURES •555 channel all-constellation multi-frequency positioning solution •Multi-channel L-Band supports TerraStar correction services •Advanced interference visualization and mitigation features •Firmware solutions including RTK, GLIDE, STEADYLINE, SPAN and ALIGN •Simple to integrate, small form-factor with 20 g vibration performance rating •Compatible with existing OEM719 integrations

Hemisphere’s aRTK technology, allows the Phantom 20 and 34 to operate with RTK accuracies when RTK corrections fail. Tracer™ uses special algorithms to sustain positioning in the absence of correction data. Positioning is scalable and field upgradeable. Use the same centimeter-level accuracy in either single-frequency mode, or employ full performance, fast RTK initialization times over long distances with multi-frequency, multi-constellation GNSS signals. High-accuracy L-band positioning available via Atlas correction. KEY FEATURES • Multi-Frequency GPS, GLONASS, BeiDou, Galileo, and QZSS • Long-range RTK baselines up to 50 km with fast acquisition times • Mechanically and electrically compatible with many other manufacturers’ modules • Compatible with many RTK sources • Atlas® L-band capable to 4 cm RMS • Athena™ GNSS engine providing best-in-class RTK performance • Serial, USB host (Phantom 34 only), USB device, and CAN connectivity for ease of integration. Contact Franck for more.

The VN-300 GPS-Aided INS incorporating the latest MEMS sensor technology, combining 3-axis accelerometers, gyros, magnetic sensors, a barometric pressure sensor and two GPS receivers to give GPS heading and roll or pitch packed into a lightweight, robust aluminum enclosure. About the size of a quarter, the VN-300 offers a high-performance inertial navigation sensing solution. With MEMS inertial sensors, two high-sensitivity GNSS receivers, and advanced Kalman filtering algorithms, the VN-300 provides optimal estimates of position, velocity, and orientation. By utilizing two separate GNSS receivers and antennas, the VN-300 enables accurate heading measurements without reliance on vehicle dynamics or magnetic sensors, providing outstanding performance under both static and dynamic conditions. Ask us about this and the many other options VectorNav offers for a solution that is right for your SWaP project.